Recently, I've been exploring some of the creative aspects of paper cutting with the impressive ScanNCut machine.
All of which resulted in lots of fabulous cut paper pieces to work with!
While sorting through the cut shapes and images, I became intrigued with the idea of arranging and collaging them onto the back of a glass plate� a process called 'reverse decoupage'.
The prints I selected for this project from my stash are printed on copy paper. It's a good weight for this collage method.
I'm interested in tessellating patterns, and chose the equilateral triangle shape � a very simple one that tiles together with no overlaps or gaps. I used the ScanNCut pattern already available in the machine, which made the cutting so easy!
Here are the steps for reverse decoupage:
Prepare white glue for decoupage by mixing it with water. I use Elmer's Glue Alland mix it 2 parts glue to 1 part water.
The glass must be clean, so wash it first with dish soap and water. Rinse and dry with a paper towel. Use glass cleaner or alcohol if needed. Take extra care not to leave fingerprints.
Place the glass plate upside-down on your work surface. You'll be working on the underside. It's easier to work on the plate if you rest it on a wide-mouth plastic container.
Brush the decoupage glue onto the glass surface in a fairly thick, even coat with a foam brush. The glue goes on white, but dries clear.
Dip each cut paper piece in a dish of water as you're working. It'll curl up and then relax. Remove from the water dish and blot away excess water. Now it's ready to add to the glue-covered glass surface
Place the cut paper shape on the glue-covered surface and apply more glue over it. Take care in arranging the cut paper elements � they're prone to sliding. Turn the plate over to check the placement.
Gently press out any air bubbles and excess glue and wipe away. After the papers are all glued on, cover the whole surface with another coat of glue to seal everything.
Allow to dry completely. Overnight is recommended. I helped speed up the drying with a heat gun, which worked well.
After the paper is dry, use a craft knife against the rim and carefully cut off the excess paper. If needed, you can use an emery board of fine sanding block to smooth the edge.
Paint the back of the plate with acrylic paint. Let dry. (see image below)
Finish with a few coats of acrylic varnish over the dry paint. Let dry.
Clean any glue from the front of the glass with glass cleaner and paper towels
NOTE: Dishes created with reverse decoupage are not dishwasher-proof, butcan be wiped clean. So they�re functional � as long as you don't submerge in water.
TIPS:
Be sure to use enough glue on the glass, under the papers.
It's important not to remove too much glue while pressing out air bubbles. When the plate is dry, you can have streaky areas and shiny spots where there wasn't enough glue.
It can take a little practice to get the amount of glue just right � and to get the hang of pressing out the air bubbles without removing too much of the glue. Be patient. It's worth the effort!
If using any inkjet images, check first to make sure the ink won't run when wet. Spray inkjet prints with fixative if necessary.
Sponging on a few layers of acrylic paint on the back of the plate creates a slightly textured and tactile surface.
Here's what I learned:Tessellating pieces will work best on a perfectly flat surface. The curve of the plate keeps the pieces from fitting perfectly together. Also, saturated papers are not the same exact size as dry ones, so it can be a bit challenging to get them all fitting together seamlessly.
When this happens, seize the opportunity and paint the back with metallic paint. You'll have beautiful slivers of metallic shine that show through the glass, filling in any gaps. Quite lovely!
There's so much potential to transform glass into fabulous art! Picture frames with glass are perfect for this process! This one is 8x10 inches. What a great way to use your Gelli� prints to create a fabulous piece of framed wall art!!
Here's how to create reverse decoupage framed art:
Remove glass from the picture frame. Be careful handling the cut glass edges. I apply low-tack painters tape around the edges of the glass for safer handling.
Cut out a focal image, if desired. I used the Direct Cut feature on the ScanNCut machine to fussy-cut a floral design�and it worked great. A huge time-saver! But the image I selected had too much detail for the scanner to fully read�it only saw the outline. So I cut out the inside blank areas with a craft knife. Then my floral print was ready to use! Easy! *Note:This floral design is clip art from the DoverPictura "Flowers CD-Rom/Book ImageArchive" (royalty free artwork). However, you can find lots of downloadable copyright-free images available on the internet from many sources. My floral image is an inkjet print and didn't run when tested with water. Before using an inkjet image, be sure to test it first.
Select a Gelli� print for the background. You can use cut or torn pieces, or an entire print as shown here.
Follow the steps shown above (glass plate project) for gluing the paper pieces in place.
As the background paper is applied to the glass, the saturated edges are easy to tear. Remove a small margin, if desired. The blank area on the glass is perfect for applying gold metal leaf� creating a beautiful imperfect edge around your print! Wipe the excess glue off the bare glass areas and allow the papers to dry.
Apply Duo Adhesive (or any glue that is tacky when dry) to the blank glass areas. Allow it to dry � it will turn clear and remain sticky to the touch. Place pieces of gold metal leaf on the sticky areas, then brush off excess metal leaf with a soft brush. Done!
Clean the front of the glass with glass cleaner and insert into the frame. It's ready to hang or give as a lovely gift!!
Note:The background Gelli� print on this framed piece is a viscosity print. To learn more about how to make a viscosity print, please see my previous blog post "Thick and Thin Gelli� Printing" from August 15, 2013. There's also a video that shows the process.
Reverse decoupage is a wonderful and creative way to use your monoprinted papers! You won't look at any clear glass item without thinking of its creative possibilities! Remember, we now have Gelli� partners all over the world, so it's easier than ever to find a Gelli�retailer near you!
You almost have to wonder if the ingenious folks at Brother had Gelli�printing in mind when they created their amazing ScanNCut cutting machine! These pair together like they were made for each other! Watch this video and see custom-designed ScanNCut stencils and masks in action with the 6x6" Square and the new 4" and 6" Round Gelli plates!
The first thing that happens when unboxing the ScanNCut is an overwhelming feeling of excitement and possibilities! All the stencil and mask designs you can dream up are now at your fingertips!
Brother says:"See it. Scan it. Cut it. Create it." And it's TRUE!!! Imagine turning your own drawings, computer-generated designs, and patterns that come in the ScanNcut machine, into stencils and masks! It's the ultimate in immediate gratification!
An essential feature of the ScanNCut is its ability to size, or scale, your design before you cut it. That's such a great thing when you're working with different-sized Gelli� plates! I was able to create unique masks designed to use with the 4" and 6" Round plates! Talk about versatile!!
The stencil material I use is Grafix Edge Stencil Film, which comes on a roll (20" x 25'). I went ahead and cut a stack of 10" squares on my cutting mat with a rotary cutter and quilting ruler. It's great to have plenty of pre-cut stencil film ready to use.
I also cut stencils and masks from 110 lb. heavy card stock� and while it's not as durable as the stencil film, it works great!
There's good news too for those of you who prefer to skip the design step and dig right in. The ScanNCut comes with over 600 built-in images for you to use. So you don't have to draw the images if that's not your inclination. I had a great results creating stencil patterns using some of the design elements that come in the machine!
The ScanNCut has so many features and functions it would be impossible for me to explain it all in this blog post. But I can direct you to the fabulous and talented artist, Julie Balzer, who is an official Brother spokesperson for ScanNCut. Julie has numerous excellent instructional videos online� in which she clearly explains different features � and inspiring and creative ways to use the ScanNCut. Julie's enthusiasm got me hooked!
Now I'd like to share a fun little technique that's great to use with stencils and masks! Making a drop shadow image!
The following instructions are for stamping with your gel plate (mounted on acrylic blocks):
Here's how:
Roll a mid-value paint color onto the plate and print onto your substrate.
Place stencil on the printed area.
Roll a dark paint onto the gel plate.
Print the dark paint through the 'holes' in stencil or mask using the gel plate as a stamp. Remove stencil. Let paint dry.
Place same stencil over the previous impression, aligning the stencil holes�then move the stencil over about an 1/8 of an inch and up a little.
Roll a light value paint onto the gel plate and stamp again over the stencil. This creates the drop shadow effect! And it's so easy!
What a great way to add a dimensional look to your stencil image! Easy and fun!
NOTE:The stencils I created from the rolled film have a bit of curl to them. You'll notice in the video that the curl can make it a little trickier to get exact placement before stamping over them. Stencil material is available in flat sheets, and might be a little easier to work with.
The prints in the video were all made using Blick Matte Acrylics. They work beautifully for layering to achieve the drop shadow images. And their matte finish makes it easy to work back into the print with colored pencils, markers, pastels, and collage.
So far, I've focused on making stencils and masks for Gelli� printing. But the ScanNCut opens up a whole universe for creative cutting to make whatever Gelli� printed paper and fabric project you can imagine!
If I sound like a serious ScanNCut enthusiast, it's because I am! I'm not a paid spokesperson � I just love the endless world of possibilities this machine presents! Both for monoprinting � and way beyond!
THIS GIVEAWAY IS NOW CLOSED!!!!
Have you sensed by now that something SPECIAL is brewing for our GIVEAWAY??!!!!
If you've guessed it's a Brother ScanNCut...you guessed RIGHT!!!
Thanks to our wonderful and generous friends at Brother International Corporation for providing a ScanNCut machine � we'll have the enormous pleasure of sending it to one VERY lucky winner!
And a Gelli Arts� Giveaway wouldn't be complete without Gelli� plates!
Ready for our Grand Prize Giveaway?!!!
Enter our Special ScanNCut and Gelli Arts� Gel Printing Plate Giveaway below. Check out all the options for entering the random drawing and choose one OR choose all the ways to enter!
